OEM Famous User interface unit Pricelist –Silver Electrolytic Copper Expulsion Fuse – HolleyDetail:
Spésifikasi
Produk Ngetik |
| EXPULSION FUSE CUT OUT, 27 kV, 150kVBIL, 100 A 8/12kA, 470Jarak mm cengkéh | EXPULSION FUSE CUT OUT, 38kV, 170kVBIL, 100A, 5/8 kA, 660mm CREEPAGE DISTANCE | EXPULSION FUSE CUTOUT, 27kV, 150kVBIL, 200A, 7.1/10 kA, 432mm CREEPAGE DISTANCE | |
No. | Fitur | Satuan | Nilai | Nilai | Nilai |
1 | Dasar |
| |||
| Model | HV1 - 27/100 - 8 | HV1 - 38/100 - 5 | HV1 - 27/200 - 7.1 | ||
| Standar | Ansi / ieee C 37.40 / 41/42 Id60282 - 2: 2008 | ANSI C-37.40/41/42 and IEC60282-2 | ANSI/IEEE C37.40/41/42 y IEC60282-2:2008 | ||
| Dipeunteun ayeuna | A | 100 | 100 | 200 | |
| Voltase anu dipeunteun | kV | 27 | 38 | 27 | |
| Minimum Short Circuit Current | |||||
| - Simmetris | kA | 8 | 5 | 7.1 | |
| - Asmimetrical | kA | 12 | 8 | 10 | |
| Minimum isolation level: | |||||
| - Impulse withstand voltage (BIL), phase to ground and between phases. | kV | 150 | 170 | 150 | |
| - Withstand voltage at power frequency between phases, dry, 1 min. | kV | 60 | 80 | 60 | |
| - Withstand voltage at power frequency between phase and ground, in wet, 10s. | kV | 50 | 70 | 50 | |
| Insulating porcelain material of the base with high purity alumina compositions (between 94% to 99%) with the addition of vitrifiers. | Nuhun | Nuhun | Nuhun | ||
| Minimum creepage distance (Phase-Earth) | mm | 470 | 660 | 432 | |
| Bahan kontak | Silver electrolytic copper | Silver electrolytic copper | Silver electrolytic copper | ||
| - Minimum thickness of the top contact silver layer (tab) | μm | 15 | 15 | 15 | |
| - Maximum electrical contact resistance between each terminal and the nearest metal part accessible after contact | Ohm | 0.000099 | 0.000099 | 0.000099 | |
| - Upper contact pressure spring with fastening and alignment mechanism | Stainless steel, grade 304 according to AISI 304, DIN 1.4301 | Stainless steel, grade 304 according to AISI 304, DIN 1.4301 | Stainless steel according to AISI 304, DIN 1.4301 | ||
| Bahan terminal | Tambaga tinu | Tambaga tinu | Tambaga tinu | ||
| -Conductor Range (Diameter) | mm | 4.11 - 11,35 | 4.11 - 11,35 | 4.11 - 11,35 | |
| -Terminals for use with copper or aluminum conductors | Nuhun | Nuhun | Nuhun | ||
| - Jinis terminal | Parallel slots, must include bolt, nuts and pressure washers made of stainless steel | Parallel slots, must include bolt, nuts and pressure washers made of stainless steel | Parallel slots, must include bolt, nuts and pressure washers made of stainless steel | ||
| Top support channel material | Galvanized structural steel | Galvanized structural steel | Galvanized structural steel | ||
| - Galvanized Material Standard | Astm A575 | Astm A575 | Astm A575 | ||
| - Standar galvanisasi | Astm A153 | Astm A153 | Astm A153 | ||
| - Minimum average thickness | μm | 86 | 86 | 86 | |
| Sudut sudut minimum | 120 ° | 120 ° | 120 ° | ||
| Minimum number of mechanical operations guaranteed | No. | 200 | 200 | 200 | |
| Minimum mechanical resistance of the horn for load operation | Dan | 200 | 200 | 200 | |
| Dimensions (See Figure 1) | |||||
| L | mm | 704 | 842 | 704 | |
| M | mm | 409 | 431 | 409 | |
| N | mm | 476 | 567 | 476 | |
| P | mm | 72 | 8 | 72 | |
| Q | mm | 131 | 147 | 131 | |
2 | Susu Tube Pilihan | ||||
| Fitur | |||||
| - Standar | Ansi / ieee C 37.40 / 41/42 | Ansi / ieee C 37.40 / 41/42 | Ansi / ieee C 37.40 / 41/42 | ||
| - Voltase anu dipeunteun | kV | 27 | 38 | 27 | |
| - Dipeunteun ayeuna | A | 100 | 100 | 200 | |
| - Minimum symmetrical/asymmetrical short-circuit current | kA | 8/12 | 5/8 | 7.1 / 10 | |
| - Internal diameter range | |||||
| - pang copelna | mm | 11.1 | 11.1 | 17.5 | |
| - maksimum | mm | 18 | 18 | 23 | |
| - Length (allowable range) | mm | 375 ± 3 | 466 ± 3 | 375 ± 3 | |
| - Metal parts of joining with the base | Tuang bondze | Tuang bondze | Tuang bondze | ||
| - Fuse holder tube cover (top contact) | Silver electrolytic copper, with a minimum thickness of 8 um | Silver electrolytic copper, with a minimum thickness of 8 µm | Silver electrolytic copper, with a minimum thickness of 8 µm | ||
| - Eye hook for pole operation | Cast Bronze, with minimum mechanical resistance of 200daN | Cast Bronze, with minimum mechanical resistance of 200daN | Cast Bronze, with minimum mechanical resistance of 200daN | ||
| - Fuse holder tube material. | Fiberglass with internal coating in moisture-proof vulcanized fiber | Fiberglass with internal coating in moisture-proof vulcanized fiber | Fiberglass with internal coating in moisture-proof vulcanized fiber | ||
| - Fuse holder opening and closing mechanism (fuse holder base) | to avoid fuse holder tube un-alignment greater than 15mm | to avoid holder tube un-alignment no more than 15mm | to avoid fuse holder tube un-alignment no more than 15mm | ||
| Suitable for chicote fuses with removable head (Arc shortening rod) | Nuhun | Nuhun | Nuhun | ||
3 | Ngalereskeun asesoris | ||||
| - Jinis fiksasi | Type B, according to ANSI/IEEE C37.42 | Type B, according to ANSI/IEEE C37.42 | Type B, according to ANSI/IEEE C37.42 | ||
| - Material | Baja galvanized | Baja galvanized | Baja galvanized | ||
| - Standar | Astm A575 | Astm A575 | Astm A575 | ||
| - Standar galvanisasi | Astm A153 | Astm A153 | Astm A153 | ||
| - Minimum average thickness | μm | 86 | 86 | 86 |
Product detail pictures:
Pituduh produk anu aya
We are going to dedicate ourselves to providing our esteemed buyers together with the most enthusiastically thoughtful products and services forOEM Famous User interface unit Pricelist –Silver Electrolytic Copper Expulsion Fuse – Holley, The product will supply to all over the world, such as: Greek, Canada, Luxemburg, It is our customers' satisfaction over our products and services that always inspires us to do better in this business. We build mutually beneficial relationship with our clients by giving them large selection of premium car parts at marked down prices. We provide wholesale prices on all our quality parts so you are guaranteed greater savings.
